TRANSMISSION & DISTRIBUTION
High voltage switchgear
SAFETY SHEET
PS 0009/A 03 G. BERNARD
1998-08-12
P. VANDAME
98.08.28
1 / 2
Sheet N° Revision Written by Date Signature Approved by Date Signature Page
MAINTENANCE
CAUSE OR ORIGIN OF HAZARD.
• To ensure safe and unimpaired operation of the equipment, regular maintenance is essential.
Neglected maintenance can create hazards.
• Maintenance operations involve hazards that must be guarded against.
WORK REQUIREMENTS.
• Comply with the maintenance programme and service intervals shown in the ALSTOM manuals.
• In addition, every maintenance operation must comply with the following requirements :
- it must be carried out by suitably qualified personnel,
- both the work involved and the associated hazards must be clearly identified beforehand,
- the tools and equipment used (standard or specific to ALSTOM) must be appropriate and in proper
working order,
- any replacement parts must be ALSTOM parts.
SAFETY INSTRUCTIONS.
OBSERVE ALL GENERAL INSTRUCTIONS GOVERNING INSTALLATION, COMMISSIONING AND
OPERATION IN ACCORDANCE WITH CURRENTLY ACCEPTED PRACTICES AS WELL AS THOSE LAID
DOWN IN THE DOCUMENTATION SUPPLIED WITH THE EQUIPMENT.
• Refer to the relevant SAFETY sheets.
• The safety instructions below are general and not exhaustive. They should therefore be modified and/or
supplemented for all specific maintenance operations to be carried out.
To Next Page
Loading...
