Alstom GL314 - T31- -001 En;02

Installation
Tightening torques
T31--001EN/02
1/4
06--2002
E ALSTOM
Presentatio n
Introduction
In the assembling with screws, all the fastening screws must be “greased” be-
fore torque tightening.
Products used
The table below gives the list of the used products for the screws before tight-
ening :
Designation ALSTOM item
reference
Supplier Supplier item
reference
Grease
--01835208
(1kg box)
MOBIL OIL
MOBILPLEX 47
MOBILUX EP3
Contact grease
--01835118
(200g tube)
EPMF
CONTACTAL
HPG
Silicon grease
--01835265
(100g tube)
SAMARO MOLYKOTE 111
Glue
--01818327
(250ml)
LOCTITE LOCTITE 225
In this module
This module contains the following topics :
Topic Page
Screw greasing before tightening 2
T ightening torques values 3