ALSTOR 822 - Safety Checks;Daily Inspection

22 | www.alstor.se
822/834/850/850 H/851
Instruction manual
SAFETY
1.8 SAFETY CHECKS/DAILY INSPECTION
Always perform safety checks on adaily basis before operating the machine and always in connection with any form of damage
orincident.
Periodic inspections can prevent damage to the machine and reduce service outlays as well as prevent incidents.
Any detected damage or wear must be promptly repaired. Check for wear, cracks, damage, loose or defective guards.
Check that:
■
The wheel bolts have been correctly tightened, tyres are free of damage and are correctly inated, and also make sure the crane
mount and weights are free of damage and correctly secured.
■
The engine oil levels and hydraulic uid levels are correct; adjust if necessary according to instructions.
For details, please refer to the section on service and maintenance.
■
Fuel level. Fill up if necessary according to the instructions. For details, please refer to the section on service and maintenance.
■
Parking brake and service brake function.
■
No hoses are damaged.
■
All fasteners are tightened. Retighten if necessary.
■
There is no leakage. If detected, take immediate corrective action.
■
Reectors are intact, clean and correctly positioned and the lights operate correctly.
■
Protective guards are closed.
■
There are no loose or foreign objects on the machine that can aect safe operation.
■
Regularly check the best before date and pressure of the re extinguisher.