SR1128 operation manual
~13~
►Press “+” button, “tH 1F 05:00” displays on the screen, to access the submenu of the
switch-off time and temperature for the first schedule of heating function.
► Press “SET” button again, “05” of hour time blinks on screen.
►Press “+” “-” button to adjust hour of time.
►Repress “SET” button again, “00” of minute time blinks on screen.
►Press “”“”button to adjust minute of time.
►Repress “SET” button, temperature “45ć” blinks on screen.
►Press “”“”button, to set the switch-off temperature of heating.
►Then, press “ESC” to exit this submenu, or wait for 20 seconds to exit automatically, the
parameter valves are saved automatically.
--------------------------------------------------------------------------------------------------------------------------
►Press “+” button, “tH 2o 10:00” displays on the screen, to access the submenu of the
switch-on time and temperature for the second
schedule of heating function.
► Press “SET” button again, “10” of hour time blinks on
screen.
►Press “+” “-” button to adjust hour of time.
►Repress “SET” button again, “00” of minute time blinks on screen.
►Press “”“”button to adjust minute of time.
►Repress “SET” button, temperature “50ć” blinks on screen.
►Press “”“”button, to set the switch-on temperature of heating.
►Then, press “ESC” to exit this submenu.
►Press “+” button, “tH 2F 10:00” displays on the screen, to access the submenu of the
switch-off time and temperature for the second
schedule of heating function.
► Press “SET” button again, “10” of hour time blinks
on screen.
►Press “+” “-” button to adjust hour of time.
►Repress “SET” button again, “00” of minute time
blinks on screen.
►Press “”“”button to adjust minute of time.
►Repress “SET” button, temperature “55ć” blinks on screen.
►Press “”“”button, to set the switch-off temperature of heating.
►Then, press “ESC” to exit this submenu, or wait for 20 seconds to exit automatically, the
parameter valves are saved automatically.
To Next Page
Loading...