EAV64301 01/2015 19
Preliminary Instructions
Handling and Storage
To help protect the drive before installation, handle and store the device in its packaging. Ensure that the
ambient conditions are acceptable.
Handling the Drive
Altivar Process drives of frame size A, B and C, and frame sizes 1 up to 3 can be removed from their
packaging and installed without a handling device.
Higher drive frame sizes require a handling device; for this reason, these drives all have lifting lugs.
Check the Delivery of the Drive
Damaged products or accessories may cause electric shock or unanticipated equipment operation.
Contact your local Schneider Electric sales office if you detect any damage whatsoever.
WARNING
DANGEROUS HANDLING
z Do not handle a damaged packaging.
z Follow the handling instructions.
z Open and handle the packaging with care.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
DANGER
ELECTRIC SHOCK OR UNANTICIPATED EQUIPMENT OPERATION
Do not use damaged products or accessories.
Failure to follow these instructions will result in death or serious injury.
Step Action
1 Remove the drive from the packaging and verify that it has not been damaged
2 Verify that the catalog number printed on the nameplate (see page 16) corresponds to the
purchase order.
To Next Page
Loading...
