OPERATION
Del uxe Control C ook & Ho l d ▪ Opera tor’s Manual ▪ MN- 4 6708 ▪ Re v 1 ▪ 11/20
44
How to Set up an Ethernet Connection
Before you begin ▪ The facility must have an Ethernet port.
▪ You will need an Ethernet cable.
Procedure To set up an Ethernet connection, do the following.
Step Action
1. Plug the Ethernet cord into the Ethernet port on the oven and the wall outlet.
2. Touch the menu icon a. The menu screen displays.
3. Touch the settings icon b. The general settings screen displays.
Continued on next page
TH-TS-011438
VMC-TS-006259
a
XXXXX XXXXX
XXXXX XXXXX
XXXXX XXXXX
XXXXX XXXXX
XXXXX XXXXX
VMC-TS-006262
b
To Next Page
Loading...
