OPERATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
57
Continued from previous page
3. The “Professional Cook” screen displays. The upcoming steps set the
parameters for this screen.
Cooking by time 4. If cooking by time, touch the cook by time icon 2. Then, touch the cooking
time
3. Enter the cooking time using the key pad. Touch the check mark.
Cooking by probe 5. If cooking by probe, touch the cook by probe icon 4. Then, touch the probe
temperature
5. Enter the probe temperature set-point using the key pad.
Touch the check mark.
Continued on next page
To Next Page
Loading...
