Alto-Shaam Converge CMC-H2H

OPERATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
58
Continued from previous page
6. Touch the cooking temperature icon 6. Enter the cooking temperature
using the key pad.
Touch the humidity percentage icon 7. Enter the humidity percentage
using the key pad.
Touch the fan speed icon 8. Enter the fan speed using the key pad. The
fan speed can be set in increments of five percent.
7. Touch the plus (+) icon to add an additional step or action, if needed.
8. Load the food into the appropriate chamber.
9. Touch the start icon 9. The cooking process timer starts to count down.
During the cooking
process
Continued on next page
CT-TS-014003
h
i
j
CT-TS-014006
k
Action Result
Touch the hand icon when
action is required...
to continue the cooking process.
Touch the chamber... to show the recipe details.
Touch “X”... to cancel the cooking process.