Amano PIX-21 - End of Daylight Saving and Print Style; Daylight Saving End Date; Print Style Configuration

Page 11
7. The Beginning of the Daylight Saving Setting
Note: The PIX-21 will automatically adjust for Daylight Saving Time.
This will take effect on the first Sunday in April and on the last Sunday in
October. To disable Daylight Saving Time, set the beginning date equal to
the ending date.
1. When the display flashes
PP33
bdL
, press the ENTER button.
2. Press the CHANGE button until the correct year appears,
then press the ENTER button.
3. Press the CHANGE button until the correct month appears,
then press the ENTER button.
4. Press the CHANGE button until the correct date appears,
then press the ENTER button.
5. When the display flashes the correct year, month and date,
press the ENTER button.
6. When the display flashes
PP33
bdL
, press the CHANGE
button to move to the end of the Daylight Saving Setting.
8. The End of the Daylight Saving Setting
1. When the display flashes
PP44
EdL
, press the ENTER button.
2. Press the CHANGE button until the correct year appears,
then press the ENTER button.
3. Press the CHANGE button until the correct month appears,
then press the ENTER button.
4. Press the CHANGE button until the correct date appears,
then press the ENTER button.
5. When the display flashes the correct year, month and date,
press the ENTER button.
6. When the display flashes
PP44
EdL
, press the CHANGE
button to move to Setting the Print Style.
PP 33
b d L
__
99 00
0 4 0 l
99 99
0 4 0 l
99 99
0 4 0 l
99 99
0 4 0 2
PP 33
b d L
__
PP 44
E d L
__
99 00
l 0 2 8
99 99
l 0 2 8
99 99
l 0 2 8
99 99
l 0 2 9
PP 44
E d L
__