Amano PIX-21 - Time and Daylight Saving Settings; Time Setting Procedure; Daylight Saving Start Date

Page 10
5. Setting the Year, Month and Date
1. When the display flashes
PPll
dA E
, press the ENTER button.
2. Press the CHANGE button until the correct year appears,
then press the ENTER button.
3. Press the CHANGE button until the correct month appears,
then press the ENTER button.
4. Press the CHANGE button until the correct date appears,
then press the ENTER button.
5. When the display flashes the correct year, month and date,
press the ENTER button.
6. When the display flashes
PPll
dA E
, press the CHANGE
button to move to Setting the Time.
6. Setting the Time
Note: Use 24 hour and regular 60 minute format when setting the time.
For example: 2:00 PM = 14:00.
1. When the display flashes
PP22
CLoc
, press the ENTER button.
2. Press the CHANGE button to choose 12 hour AM/PM
display or 24 hour military time, then press the
ENTER button.
3. Press the CHANGE button until the correct hour appears,
then press the ENTER button.
4. Press the CHANGE button until the correct minutes appear,
then press the ENTER button.
5. When the display flashes the correct time, press the
ENTER button.
6. When the display flashes
PP22
CLoc
, press the CHANGE
button to move to the beginning of the Daylight
Saving Setting.
PP ll
d A E
99 55
0 l 0 l
99 99
0 l 0 l
99 99
0 4 0 l
99 99
0 4 l 8
PP ll
d A E
PP 22
C L o c
PP 22
l 2 : 0 0
22 44
l 2 : 0 0
22 44
l 2 : 0 0
22 44
l 2 : 0 0
PP 22
C L o c