AMAZON COMMERCIAL 6000 Count Compact - Measurement Range Adjustment; Relative Measurement

16
EN
Changing the measurement range
By default, the measurement range is set
automatically and the Auto Range indicator (7)
lights up. It is possible to set the measurement
range manually.
• Press the RANGE button (C) to activate the
manual mode and to disable the automatic range
setting. The Auto Range indicator (7) goes off.
• By every press on the RANGE button (C) the
relevant decimal place changes its position.
• If a reading is higher than the measurement
range, OL lights up on the display (A).
• Press and hold the RANGE button (C) for more
than 1second to exit manual mode and restore
automatic range setting. The Auto Range
indicator(7) lights up.
Relative measurement
The relative measurement feature allows you to
make measurements relative to a stored reference
value.
• Initially, keep the test probes attached to the
circuit or the component to be measured.
• Press the REL button (H) to save this
measurement as the stored reference value and
to zero the display. The indicator (9) lights up.