AMADOS BAG0083.2 11.17
5 Commissioning
This section provides information on putting your machine into opera-
tion.
CAUTION
• Before operating the fertilise spreader for the first time the oper
tor must have read and understood the operating manual.
• See also the operating manual for the fertiliser spreader!
5.1 Connect AMADOS
E+S
1. Connect the machine mounted/attached to
the tractor via the machine connector (Fig.
1/1).
2. Connect the signal cable from the tractor
signal socket or the sensor X (Fig. 1/2) to
the AMADOS
E+S
1
To Next Page
Loading...
