Amazone AMADOS E+S - The True Working Width and the Set Spreading Width Are Not Identical

Faults
30
AMADOS BAG0083.2 11.17
7.1.2 The true working width and the set spreading width are not identical
When the true working width and the set spreading width are not
identical, an offset of the spread deflector setting can be made.
1. To select offset: Press the and keys simulta-
neously.
→ Display working width / spread deflector angle
Working width [m] / spread deflector angle [°]
2. Raise or lower the spread deflector using the or
keys until the true working width is reached.
→ Only the value of the diffusing panel angle is modified on the
display. The value of the working width remains constant.
3. Store with the
key.
The offset value remains stored until the computer is reset.