Amazone AMADOS E+S - 4 Structure and Function; Function; Display

Structure and function
AMADOS
BAG0083.2 11.17
7
4 Structure and function
The following section provides information on the machine structure
and the functions of the individual components.
4.1 Function
The AMADOS
E+S
can be used on the E+S spreader as an
automatic control unit.
Functions:
• Ground speed-related regulation of the spread rate.
• Remote-controlled setting of spreading width in compliance with
the area-specific spread rate (quantity adjustment).
• Job administration.
4.2 Display
Information on the display:
(1) The current forward speed in [km/h] (during use)
(2) The current spread rate in [g/m
2
] (during use)
(3) Display: Fault message
(4) Shutter open
(5) Display: Percentage deviation from the specified spread rate
(6) Display:
ο Permanently illuminated: Spread area in job [m
2
]
ο Flashing: Total spread area [ha]
(7) Display: Spread distance in job [km]
(8) Display: Spread quantity in job [kg]
(9) Reception of impulses for determining distance travelled
(10) Automatic quantity regulation switched on