6
Information about the computer
AMADOS
+
DB 1001 01.04
1.6 Declined use
AMADOS
+
has exclusively designed for the usual
operation as a display-, monitoring- and controlling
device for agricultural machinery.
AMADOS
+
has not been designed for the application
of slug pellets or fine seeds.
Any use other than that stipulated above is no longer
regarded as designed use. The manufacturer does
not accept any responsibility for damage resulting
from this. Therefore, the operator himself will carry
the full risk.
Under "designed use" the operator must adhere to
the manufacturer’s prescribed operation, mainte-
nance and repair conditions, and exclusively use
original AMAZONE spare parts.
AMADOS
+
may only be operated, maintained and
repaired by such persons who have been made ac-
quainted with it and who have been advised about
the dangers.
All applicable accident prevention advice as well as
any further generally accepted safety-, working-,
medical- and road traffic rules should be adhered to.
AMAZONE machines have been manufactured with
great care, however, certain deviations from the ap-
plication rate cannot totally be excluded. These
deviations may be caused, e. g. by:
• Varying composition of the fertilizer and of the
seed (e. g. grain size, specific density, grain
shape, dressing, sealing).
• Drifting.
• Blockage or bridging (e.g. by foreign particles, bag
residue, damp fertilizer, etc.).
• Undulated terrain.
• Wear of wearing parts (e.g. spreading blades, . .).
• Damage by external influence.
• Wrong drive-R.P.M. and travelling speed.
• Fitting wrong spreading discs (e.g. mixing them
up).
• Wrong setting of the machine (incorrect mounting,
not adhering to the setting chart).
Before every operation and also during the operation
check your device for proper function and for suffi-
cient application accuracy of the machine.
Claims regarding damage not having occurred on the
AMADOS
+
itself will be rejected. This also applies to
damage due to application errors. Arbitrary modifica-
tions to the AMADOS
+
may result in damage and
therefore, the manufacturer does not accept liability
for such damage.
To Next Page
Loading...
