Safety
7
AMADOS
+
DB 1001 01.04
2. Safety
This instruction manual contains basic advice which
must be adhered to when mounting, operating and
maintaining the machine. Ensure that this instruction
manual has been read by the user/operator before
starting to operate the device and that it is made
readily available at all times to the user.
Please strictly observe and adhere to all safety ad-
vice given in this instruction manual.
2.1 Dangers when not adhering to
safety advice
Not adhering to the safety advice given
• may result in endangering the user or other per-
sons, the environment and/or the machine itself.
• may result in the loss of any claim for damages.
Not paying attention to the safety advice may cause
the following risks:
• Danger for persons by not secured operational
range.
• Failure of important functions of the machine.
• Failures of prescribed measures for maintenance
and repair.
• Danger for persons by mechanical or chemical
affects.
• Dangers to persons or to the environment by leak-
ing hydraulic oil.
2.2 Qualification of operator
The implement may only be operated, maintained
and repaired by persons, who are acquainted with it
and have been informed of the relevant dangers.
2.3 Symbols in this instruction man-
ual
2.3.1 General danger symbol
Not adhering to the safety advice in this instruction
manual may cause danger to health and life of per-
sons. They are identified by the general danger sym-
bol (Safety symbol according to DIN 4844-W9).
a
2.3.2 Attention symbol
Attention symbols which may cause dangers for the
machine and it’s function when not being adhered to,
are identified with the Attention symbol:
I
2.3.3 Hint symbol
Hints regarding machine's specific particularities,
which have to be adhered to for a faultless function of
the machine are identified with the hint symbol
F
2.4 Safety advice for retrofitting elec-
tric and electronic devices and /or
components
The function of the implements' electronic compo-
nents and parts may be affected by the electric-
magnetic transmittance of other devices. Such affects
may endanger people when the following safety ad-
vice will not be adhered to:
When retrofitting electric and electronic devices and /
or components to the implement with connection to
the on-board electric circuit, the user must ensure by
himself that the installation will not cause any distur-
bance to the tractor electronic or other components.
Special attention must be paid that the retrofitted
electric and electronic parts correspond to the EMV-
guide 89/336/EC in the relevant valid edition and that
they bear the EC-sign.
For retrofitting mobile communication systems (e. g.
radio, telephone) the following requirements must be
fulfilled:
Only install devices which have officially been author-
ised in your country.
Firmly install the device.
The use of portable or mobile devices inside the trac-
tor cab is only permissible with a connection to a
firmly installed external antenna.
Install the transmitter spaced apart from the tractor's
electronic.
To Next Page
Loading...
