Amazone Citan 12001-C User Manual

settings
154 Citan 12001-C/15001-C BAH0094-3 12.2019
8.10 Adjusting the seed drill wheel mark eradicator
1. To adjust the wheel mark eradicator tines,
raise the rear frame slightly using the tractor
hydraulic system and use suitable supports.
2. Put the working depth in the desired
position by repositioning the wheel mark
eradicators (Fig. 196/1)
3. Unlock the pin (Fig. 197/2), grab the wheel
mark eradicator by the handle (Fig. 197/3),
remove the pin and move the working depth
to the desired position.
4. Insert the pin (Fig. 197/2) and secure with a
linch pin.
Fig. 196
Fig. 197
For road transport, secure the wheel
mark eradicators in the topmost posi-
tion.
8.11 Adjusting the guide wheel harrow
Check the adjustment of the guide wheel harrow during field opera-
tion:
 after changing from light soil to heavy soil and vice-versa.
 after the soil has changed due to different seedbed production or
precipitation
8.11.1 Adjusting the working depth of the guide wheel harrow
Increase working depth: +
Fig. 198
Reduce working depth: -
1. Loosen the nuts (Fig. 198/1) and remove
them.
2. Move the harrow arm (Fig. 198/2) to the
desired position.
3. Put on the nuts and tighten them.

Amazone Citan 12001-C Specifications

General

Brand	Amazone
Model	Citan 12001-C
Category	Farm Equipment
Language	English