AMBROGIO BASIC - Page 47

- 47 -
C141501700.fm
User's manual
GB
Once the winter season has end-
ed, disconnect the kit and reacti-
vate the recharging station.
1-Press the button (D) of the
power supply unit on OFF.
2-Disconnect the plug of the
power supply unit (A).
3-Disconnect the cable (F) from
the transmitter group (B).
4-Connect the cable for the kit
(E) to the transmitter group
(B) (see "Installation of re-
charging station and transmit-
ter-power supplier group").
5-Connect the plug of the power
supply unit (A).
6-Press the button (D) of the
power supply unit on ON.
7-Position the robot inside the
recharging station.
IDM - 41501710800.tif
transmitter (B)
pushbutton (D)
"Winter recharging kit"
cable (F)
power supply unit (A)
IDM - 41501710500.tif
Reload station
transmitter (B)
power cable (E)
power supply unit (A)
pushbutton (D)