- 5 -
C141501700.fm
User's manual
GB
For every technical service request re-
garding the machine, please indicate the
data found on the identification plate, the
approximate hours of use and the type of
fault detected.
The appliance Ambrogio Line
200 is a robot designed and built
to automatically trim grass in gar-
dens and house lawns in any time
of the day. It is small, compact, si-
lent, waterproof and easy to
transport.
Relative to the various specifica-
tions of the sufrace to be mown,
the robot can be programmed to
machine a number of areas: a
main one and, in addition, two or
three secondary areas.
During its functioning the robot
trims the area marked off by the
perimeter wire and/or by barri-
ers (fences, walls, etc.)
When the robot detects the per-
imter wire or meets an obstacle it
changes trajectory in a random
manner and starts again in a new
direction.
According to its functioning prin-
ciple ("random"), the robot car-
ries out an automatic and
complete trimming of the
marked off lawn (see figure).
The lawn surface that the robot
is able to trim depends on a series of fac-
tors.
– robot model and type of batteries in-
stalled
– area features (irregular perimeters,
uneven surface, divided area, etc.)
– lawn features (type and height of
grass, moisture, etc.)
– blade conditions (with efficient sharp-
ening, without residues and deposits,
etc)
REQUESTING TECHNICAL ASSISTANCE
TECHNICAL INFORMATION
EQUIPMENT GENERAL DESCRIPTION
IDM - 41501700200.tif
robot
robot
To Next Page
Loading...
