Power Supply: Separate ALS-600PS or ALS-600SPS power supply
can be placed conveniently out of the way and
plugged into your nearest 120 VAC outlet -- no
special wiring needed. Supplies 50 VDC at 25 amps
to ALS-600 amplifier.
The ALS-600PS includes an exclusive Multi-Voltage
Power Transformer to compensate for stressful high
line voltage and performance robbing low line voltage.
Both the ALS-600PS and ALS-600SPS power
supplies can be configured for 120VAC or 240VAC
operation.
Step-Start Current Inrush Protection extends the life
of power supply components.
Power Requirements: 100-130VAC or 220-250VAC, 50/60 Hz. Wired for
120VAC. The ALS-600PS draws less than 12 amps
at 120VAC, and less than 6 amps at 230 VAC. The
ALS-600SPS draws less than 14 amps at 120VAC,
and less than 7 amps at 240VAC
Dimensions (ALS-600): 6"H x 9.5"W x 12"D (takes up less desktop space than your
transceiver)
Dimensions (Power Supply): 6"H x 9.5"W x 14”D -- can be placed conveniently out-of-
way.
Weight (ALS-600): 12.5 pounds
Weight (ALS-600PS): 32.5 pounds (linear power supply)
Weight (ALS-600SPS): 10 pounds (switching power supply)
OPTIONAL ACCESSORIES
• MOD-10MB Modification Kit for 10/12 meters
• QSK-5 High Power Pin Diode T/R Switch
• ALS-500RC Remote Control Head for ALS-600 (Ser. No. 14378 and higher)
• ARI-500 Automatic Band Switch for ALS-600 (Ser. No. 14378 and higher)
- ARI-500 Interface Cables. Check with Ameritron for pre-made cables for
popular transceivers.
5
To Next Page
Loading...
