A-8 | 3050-AM Moisture Analyzer
Zero Duration
Enter the verification duration in minutes . The system defaults to the mini-
mum time required.
Schedule Zero
Schedule routine verifications by clicking the Daily, Weekly, or Monthly
button
Never No zero cycle will be done. Scheduling slots at the bottom of
the box are not available.
Daily Select the time of day by entering a number in the Hour slot
at the bottom of the box.
The analyzer uses a 24-hour clock. Example: 1:00 PM = 13 hours.
Weekly Select the day of the week from the drop-down list under Day
of the week at the bottom of the box. You must also enter a
time of day (1 through 24) in the Hour slot to begin the zero
cycle.
Monthly Enter the numeric (1 through 28) day of the month in the Day
slot, and the time (1 through 24) in the Hour slot to begin zero
cycle.
Saving Your Settings
To save settings on the General tab, click Apply.
To save settings and exit the program, click Apply+Exit.
To abort changes you have made, click Cancel+Exit. This will close the
Configurator software program.
NOTE
Figure A-6.
Dryer Production Code
entry screen.
To Next Page
Loading...
