1-6 5000 Multi Point Moisture Analyzer
Externally mounted controls and indicators:
• Sample gas flow control
• Reference gas flow control
• Moisture generator flow control regulator
• Flowmeter
• Back pressure regulator control
• Back pressure gauge
5000 Controller
All analyzer functions are microprocessor controlled. Operating parameters can be set and changed
using the 18 button keypad on the controller. Continuously updated moisture analysis data, system
operating parameters, and system messages are displayed on a 4 line, 80 character display. Control-
ler outputs are two 4 to 20 mA analog signals and various alarm contacts. An RS-485 serial port is
also provided on the controller to facilitate remote communication with a personal computer and
networking of numerous analyzers.
To Next Page
Loading...
Need help?
General
