Ametek BrookField TC Series - Normal Operation; Selecting the Pump Speed (Low;High)

110-512 BEL/EN
25
Selecting the Temperature Unit
The temperature units sub-menu (°C / °F) allows you to select the temperature unit in which the actual
bath temperature and set point temperature are displayed. The factory default is °C.
To Access: Press the key until °C/°F appears on the display.
To Change: To select °F, touch the bottom portion of the scroll bar; to select °C, touch
the top portion of the scroll bar.
To Accept: Press
,
, , or allow the LCD to return to the main operational
display (approximately 10 seconds).
Touch top arrow for
degrees C
Touch bottom arrow for
degrees F