Ametek BrookField TC Series - Normal Operation; Calibrating Your Circulator

110-512 BEL/EN
26
Selecting the Pump Speed
This sub-menu allows you to select your Circulator’s pump speed. The choices are Low (LO) and
High (HI); the factory default is High (HI).
To Access: Press the key until PUMP appears on the display.
To Change: To select the high pump speed, touch the top arrow; to select the low pump
speed, touch the bottom arrow.
To Accept: Press
,
, , or allow the LCD to return to the main operational
display (approximately 10 seconds).
Touch top arrow to select
High
Touch bottom arrow to select
Low