6 26-03-2004 123200 03
1.2 Safety instructions
Read this manual carefully before doing
any maintenance on the instruments!
Please follow the instructions and procedures described in
this manual in order to maintain the instruments correctly
and to avoid any personal injuries and/or damage to the
instruments.
Warning
• The calibrator is designed for interior use only and
should not be used in risk-prone areas, where
vapour or gas leaks, etc. may constitute an explosives
hazard.
• Never use heat transfer fluids such as silicone, oil,
paste, etc. These fluids may penetrate the calibrator
and cause damage or create poisonous fumes.
Caution – Hot surface
This symbol is engraved in the grid plate.
• Do not touch the grid plate, the well or the insertion
tube as the calibrator is heating up – they may be very
hot.
• Do not touch the handle of the calibrator during use – it
may be very hot.
Note…
• The product liability only applies if the instrument is
subject to a manufacturing defect. This liability
becomes void if the service personnel fails to follow the
maintenance instructions set out in this manual or uses
unauthorised spare parts.
• The instrument must not be exposed to draughts.
To Next Page
Loading...
Need help?
General
