Ametek PARSTAT 4000 User Manual

PARSTAT 4000 Hardware Manual
PARSTAT 4000 Hardware Manual 30
Note: In boosted mode, the system is required to stay on a single current range, and is
limited in this mode to current measurements at a resolution of 16 bits for the boosted
range.
This option has components that are built into the base unit, so it must be purchased at
the same time along with the base unit, or at a later time by returning the base unit to a
qualified Princeton Applied Research Service Center for installation and calibration.
Refer to Appendix 1 in this hardware section for power booster setup and connections.
5.3 VersaSTAT LC ultra Low Current Option
The VersaSTAT LC Ultra Low Current Option is a plug-and-play add-on option that
provides current ranges down to a minimum range of 80fA. Please see product
brochure for additional details.

Ametek PARSTAT 4000 Specifications

General

Brand	Ametek
Model	PARSTAT 4000
Category	Laboratory Equipment
Language	English