AML Triton - Laser Symbology Settings

2 - 22
USER’S GUIDE Triton Wireless Hand-held Terminal
Laser Symbology Settings (SR, LR, ALR)
Section Setting Parameter Available Options Option Description
EAN-UPC
UPC-A Enabled/Disabled Enable/Disable decoding of UPC-A
symbols
UPC-E Enabled/Disabled Enable/Disable decoding of UPC-E
symbols
UPC-E1 Enabled/Disabled Enable/Disable decoding of UPC-E1
symbols
EAN-8 Enabled/Disabled Enable/Disable decoding of EAN-8
symbols
EAN-13 Enabled/Disabled Enable/Disable decoding of EAN-13
symbols
Bookland Enabled/Disabled Enable/Disable decoding of
Bookland symbols
Supplements 1.) Decode Require supplements for good
decoding
2.) Ignore Ignore supplements
3.) 378/379 Only decode EAN-13 supplements
that start with 378 or 379
4.) 978 Only decode EAN-13 supplements
that start with 978
5.) Automatic Automatically determine if
supplement is available, decode if
possible
6.) Smart EAN-13 supplements with 378, 379, or
978 are decoded
A Check Digit 1.) Verify Verify but do not transmit UPC-A
check digit
2.) Transmit Verify and transmit UPC-A check digit
E Check Digit 1.) Verify Verify but do not transmit UPC-E
check digit
2.) Transmit Verify and transmit UPC-E check digit
E1 Check Digit 1.) Verify Verify but do not transmit UPC-E1
check digit
2.) Transmit Verify and transmit UPC-E1 check
digit
UPC-A Preamble 1.) None No UPC-A Preamble
2.) System Character Send number system (0 or 1) prex
3.) Country Code +
System Character
Send number system (0 or 1) prex
and country code (0 for US)