AML Triton - Page 56

2 - 31
USER’S GUIDE Triton Wireless Hand-held Terminal
2-Dimensional Imager Symbology Settings - cont’d.
Type Symbology
Setting Parameter
Available Options Option Description
Linear
(cont’d)
Codabar
(cont’d)
Min Length Min: 0 characters Minimum length in characters to allow
a good read
Max: 60 characters
Max Length Min: 0 characters Maximum length in characters to allow
a good read
Max: 60 characters
MSI/Plessy
MSI Enabled/Disabled Enable/Disable decoding of MSI symbols
MSI Check Digit 1.) Don’t TX Do not transmit the check character
2.) Transmit Transmit the check character
MSI Min Length Min: 0 characters Minimum length in characters to allow
a good read
Max: 48 characters
MSI Max Length Min: 0 characters Maximum length in characters to allow
a good read
Max: 48 characters
Plessy Enabled/Disabled Enable/Disable decoding of Plessy
symbols
Plessy Min Len Min: 0 characters Minimum length in characters to allow
a good read
Max: 48 characters
Plessy Max Len Min: 0 characters Maximum length in characters to allow
a good read
Max: 48 characters
GS1 (RSS)
GS1 Databar Enabled/Disabled Enable/Disable decoding of GS1
Databar (14) symbols
GS1 Limited Enabled/Disabled Enable/Disable decoding of GS1
Limited symbols
GS1 Expanded Enabled/Disabled Enable/Disable decoding of GS1
Expanded symbols
Expanded Min Min: 0 characters Minimum length in characters to allow
a good read
Max: 74 characters
Expanded Max Min: 0 characters Maximum length in characters to allow
a good read
Max: 74 characters
Telepen
Telepen Enabled/Disabled Enable/Disable decoding of Telepen
symbols
Telepen Output 1.) AIM Output Decode as standard full ASCII
2.) Original Decode as compressed numeric
Min Length Min: 0 characters Minimum length in characters to allow
a good read
Max: 60 characters
Max Length Min: 0 characters Maximum length in characters to allow
a good read
Max: 60 characters