ADS 70 / ACR 70 D 10
Safety regulations :
3.1 Proper use :
The vibration rammer ADS-70 is manufactured according to the latest technology and recognized safety
standards. In spite of this, the use of the roller may involve risks for life and health of the user or of third per-
sons respectively damage to the machine itself or to other objects if :
• it is used for other purposes than those for which it has been built
• it is improperly modified or converted
• the safety regulations are not kept to
• it is not operated and/or serviced by skilled staff
The ADS-70 must only be used if it is in technically perfect condition for the applications for which it is prop-
erly intended and with a due sense of concern for safety and awareness of possible dangers according to the
operating instructions. Especially disturbances which might affect the safety of the machine must immediately
be eradicated.
For operation of the vibration rammer, the relevant regulations for prevention of accidents, the standard
safety rules and the regulations which are in force in each country do, of course, apply.
The paragraph „Fields of application“ (2.1) defines the applications for which the ADS-70 is exclusively de-
termined. Any different use or use going beyond these applications is improper. The manufacturer/ supplier
cannot be held liable for any damage or injury which might result from such improper use. The user alone
must assume full responsibility for the results of improper use of the machine.
______________________________________________________________________________________
3.2 Operating the vibration rammer :
Only skilled persons over 18 years, who have been trained on the roller and who have been instructed to do
such work, are allowed to operate the rammer. Competences and responsibilities must be clearly determined
before operation and must strictly be kept to.
Persons who are under the influence of drugs, medicine or alcohol must neither operate the roller nor carry
out maintenance or repair works.
Maintenance and repair works require special knowledge and must, therefore, only be carried out by skilled
staff.
______________________________________________________________________________________
3.3 Safety remarks in the operating/maintenance manual :
Danger Where this sign appears, situations are mentioned in which persons
might be exposed to danger.
Attention :
Where this remark appears, information is given about possible disturbances
on the machine or on machine components.
Note :
Under this remark, technical information providing for the optimum
economical use of the machine is given.
To Next Page
Loading...
Need help?
General
