ADS 70 / ACR 70 D 22
Maintenance :
9.0 Maintenance schedule
Period/Operating hours
Maintenance work to be carried out Description – Page
Daily Diesel engine (see operating instructions for
YANMAR L 40 AE)
Check oil level inside the tamping system
Check the rammer on exterior damage
Page 19
After 25 operating hours Diesel engine (see operating instructions for
YANMAR L 40 AE)
Check whether all screws are still tight and
tighten if necessary.
Change fuel filter
Page 19
After 100 operating hours Change air filter cartridge (earlier if neces-
sary due to strong use of the rammer)
Page 20
Every 200 operating hours Check oil level inside the tamping system
Check whether all screws are still tight
Change fuel filter
Check fuel pipes on possible leaks
Page 19
Page 19
Every 500 operating hours Change the oil inside the tamping system Page 19
Once a year Take the vibration rammer to the next
RAMMAX service station for inspection
To Previous Page
Loading...
Need help?
General
