ADS 70 / ACR 70 D 7
Description :
2.0 Description
Ever growing requirements towards engineering and efficiency demand for continuous develop-
ment and new conceptions in power, easy handling and operating safety of a compaction machine.
Due to long lasting experience, use of diesel rammers under highest load, in practical and most
difficult applications on delicate job sites, technical innovations have been found that have been
integrated in construction (and design), thus generating a highly demanding quality concept.
The newly developped antivibration handle bar allows the operator to work with a very easily ma-
noeuvrable diesel rammer offering reduced vibrations in the handle area.
2.1 Fields of application :
The Ammann Diesel rammer ADS-70 has especially been designed for compaction works in water,
gas or cable trenches as well as in distant heating trenches or for works on dam or dike protection.
Road construction, all kinds of repair works on roads or pathways, job site reinstatements, under-
ground compaction in basements and on hall soils are the ideal application for the ADS-70.
________________________________________________________________________________
2.2 Modifications on the machine :
For safety reasons, it is not allowed to the user to carry our modifications or conversions on the
rammer himself without the manufacturer’s authorization. This machine is only to be equipped with
original spare parts which have especially been designed for this appliance and which meet with
the manufacturer’s specifications. Installation or use of extra equipment or specials may reduce the
operating safety.
The manufacturer cannot be held liable for any damage caused by the use of non-original spare
parts or of extra equipment.
To Next Page
Loading...
Need help?
General
