ADS 70 / ACR 70 D 6
Technical specifications :
1.3 Noise and vibration values
The following noise and vibration data according to EC Machinery Directive in the
version (2006/42/EC), was determined, taking into account the following standards
and directives.
During operation, these values may vary in accordance with the existing operating
conditions.
Noise values
The sound level accoring to appendix 1, paragraph 1.7.4.u of the EC-machinery regulation
is for
- Sound pressure level at the operator’s stand :
L
PA
= 94,3 dB
- Measured sound power level L
WA,m
:
L
WA,m
= 106 dB
- Guaranted sound power level L
WA,g
L
WA,g
= 108 dB
The noise values were determined, taking into account the following directives and stan-
dards: Directive 2000/14/EC / EN ISO 3744 / EN 500-4
Hand-arm-vibration values
Hand/arm vibration values according to Appendix 1, sub-clause 3.6.3.1 of the EC Machinery
Directive:
Weighted effective acceleration
11,3 m/s
2
Uncertainty K
1,0 m/s
2
The acceleration value was determined, taking into account the following directives and
standards: EN 500-4 / DIN EN ISO 5349
Technical modifications reserved.
To Next Page
Loading...
Need help?
General
