16 ARX 1
1201281 A | 24.07.2013
1.1.8 Spare parts
In this manual, we describe selected maintenance work. We refer you to your
authorized dealer for the remaining maintenance work in accordance with the
maintenance plan.
When performing scheduled and unscheduled repairs, you may need to replace
components of the roller.
Only use spare parts which meet the requirements specified by the
Amman Schweiz AG. These requirement are fulfilled if only original Ammann spare
parts are used.
For the ordering of spare parts, we provide you with a spare parts catalog.
1.2 Structure of the manual
The following explanations are designed to familiarize you with the roller and to
provide support for handling and maintenance.
It is essential that you read chapter 3 Safety information, Page 27 carefully before
commissioning and carrying out maintenance work.
Observing the "safety instructions" in particular increases the reliability of the roller in
operation and its service life. This reduces repair costs and down time.
1.2.1 Orientation on the roller
When describing the components of the roller, we inform you of their position on the
roller. We adhere to the orientation below when doing so.
Fig. 1-1 Orientation ARX 1
We view the roller from the position of the driver in the driver’s position in the direction
of travel.
Rear
Top
Bottom
Left
Right
Front
To Next Page
Loading...
