Ammann ARX 20 - Intended Use; Intended Purpose of the ARX 1; Requirements for the Roller Driver; Application Limits

24 ARX 1
1201281 A | 24.07.2013
2.4 Intended use
2.4.1 Intended purpose of the ARX 1
ARX 1 vibration rollers are universal rollers designed for use on small and medium-
sized building sites.
Normal modes of
operation
Use the ARX 1 roller exclusively for driving on and compacting:
● Unbonded layers (earth, gravel, crushed stone).
● Blacktops (asphalt).
Special operating
modes
● Transport of the roller from A to B (crane and low loader).
● Cleaning the roller.
● Maintenance of roller according to maintenance plan or in the event of defects.
● Rectification of machine faults by trained personnel based on error messages.
● Towing the roller.
● Proper disposal by the operator in accordance with national regulations.
2.4.2 Requirements for the roller driver
Only trained, suitable and reliable specialists with a valid national driving license for
this category of vehicle may operate the rollers.
2.4.3 Application limits
Tab. 2-6 Limits for application in consideration of environmental conditions
Operation Storage
Temperature limit -10°C to +48°C -25°C to +48°C
Humidity All-year operation / outdoor storage
Terrain Graded Graded
Upslope 30% with / 40% without vibration 40%
Downslope 30% with / 40% without vibration 40%