2
Index
1. GENERAL INFORMATION 4
1.1 PRODUCER 4
1.2 ASSISTANCE CENTERS 4
1.3 CERTIFICATION 4
1.4 WARRANTY 4
1.5 PRE-ARRANGEMENTS CHARGED TO
THE CUSTOMER 4
1.6 HANDBOOK STRUCTURE 4
1.6.1 Object and contents 4
1.6.2 Utilizers 4
1.6.3 Preservation 4
1.6.4 Symbols utilized 5
2. MACHINE DESCRIPTION 6
2.1 WORKING PRINCIPLE 6
2.2 MAIN COMPONENTS 6
2.3 MACHINE STRUCTURE 6
2.4 DIMENSIONS 6
2.5 SURROUNDING CONDITIONS 6
2.6 LIGHTING 6
2.7 VIBRATIONS 6
2.8 NOISE EMISSIONS 6
2.9 TECHNICAL DATA 7
2.10 STANDARD EQUIPMENT 7
2.10.1 Standard accessories 7
2.10.2 Upgrading and implementing of mechanical
parts 7
2.10.3.Customized optional accessories 7
2.11 ELECTROMAGNETIC AMBIENT 7
3. SAFETY 8
3.1 GENERAL WARNINGS 8
3.2 SCHEDULED USE 8
3.3 INADVISABLE USE 8
3.4 DANGEROUS AREAS 8
3.5 PROTECTION DEVICES 8
3.6 STOP FUNCTIONS 8
3.7 SAFE WORKING PROCEDURES 8
3.8 RESIDUAL RISKS 9
3.9 PLATES 9
4. INSTALLATION 9
4.1 SHIPPING AND HANDLING 9
4.2 STORAGE 9
4.3 PRELIMINARY ARRANGEMENTS 10
4.4 UNPACKING 10
4.5 MACHINE POSITIONING 10
4.6 CONNECTIONS 10
4.6.1 Pneumatic connection 10
4.6.2 Electric connection 10
4.6.3 Collegamento elettrico della tastiera di
controllo 11
4.7 PRELIMINARY CONTROLS 12
4.8 MACHINE ARRANGEMENT 12
4.8.1 V-Nails magazine loadiing 12
4.8.2. V-nail guide head replacement to change V-nails
size 12
4.9 ADJUSTMENTS 13
4.9.1 Adjustments for v-nails positioning 13
4.9.2 VERTICAL CLAMP ADJUSTMENT 13
4.9.2.A Vertical clamp position adjustment 13
4.9.2.B Vertical clamp height adjustment 13
4.9.3 Frontal clamp adjustment 14
4.9.4 FENCE ADJUSTMENT 14
4.9.5 Working pressure adjustment 14
4.9.6. Protective shield adjustment 15
4.10 CHECKING OPERATIONS TO BE EF-
FECTED BEFORE WORKING START 15
5 FUNCTIONING 16
5.1 OPERATORS 16
5.2 CONTROL PANEL 16
5.3 KEYBOARD CODE/COLORS OF ELEC-
TRONIC CONTROL DEVICE 17
5.4 Mode of operation 18
5.4.1 Manual functions menu 18
5.4.2 Jog menu 18
5.4.3 Input test menu 18
5.4.4 Output test menu 18
5.4.5 Machine zero point (homing) 19
5.4.6 Editing menu 19
5.4.7 Rename 19
5.4.8 Copy 19
5.4.9 Delete 19
5.4.10 Search 19
5.4.11 Creation of new programs 19
5.4.12 Execution menu 21
5.4.13 Working speed modification 22
5.4.14 Enabling access code protected services 22
5.5 FRAMES PRODUCTION AND V-NAILS
CONSUMPTION 23
5.6 TIPS FOR PERFECT JUNCTIONS 23
5.7 MACHINE STOP 24
5.8 PUTTING OUT OF SERVICE 24
6. PROGRAMMING 25
6.1 CREATION OF A PROGRAM 25
6.1.A. Auto-learning mode 25
6.1.B Inputting mode 25
7. EXECUTION OF THE PROGRAM 26
7.1 EXECUTION OF JUST DIGITED
PROGRAM 26
7.2 EXECUTION OF A PROGRAM PREVI-
OUSLY MEMORIZED 26
7.3 MACHINE ADJUSTMENT 26
8. MAINTENANCE 27
8.1 STATE OF MAINTENANCE 27
8.2 MACHINE ISOLATION 27
8.3 SPECIAL CAUTIONS 27
8.4 CLEANING 27
8.5 LUBRICATION 27
8.6 ORDINARY MAINTENANCE 27
8.7 EXTRAORDINARY MAINTENANCE 28
To Next Page
Loading...