9
3.8 RESIDUAL RISKS
During the normal working cycle and while
performing maintenance, the operators are
exposed to several residual risks that, because
of operations own nature, can not be totally
eliminated.
• Risk of finger crushing due to the presence
of vertical and frontal clamping
• Risk due the presence of electricity in the
machine
3.9 PLATES
The warning plates carrying out safety functions
can not be removed, covered or damaged.
To view the plates or adhesive signs location,
consult the Fig.10.2-D
Table 3.9 A- Types of plates
Plate concerning machine characteristics
Adhesive sign concerning the finger danger
zone
Adhesive sign concerning the finger danger
zone
Adhesive sign concerning the behaviour to be
kept in the working area
4. INSTALLATION
4.1 SHIPPING AND HANDLING
The shipment must be performed by qualified
technical staff. The machine has to be shipped
in a safe way to avoid any damage to its parts.
• All the protections & guard devices must be
properly closed and clamped.
• The machine has to be shipped like positioned
for installation.
• Before shipment, it is necessary to lubricate
the parts which are not painted to avoid
rusting them.
• According to the type of shipment, it is
necessary to protect the machine from any
jarring impact or stress
Figure 4.1A - machine handling indications
Machine’s total weight: about 380 Kilos
Any damage of the machine caused during its
shipment or handling is not covered under
warranty.
Repairs or replacements of damaged parts are
charged to the customer.
4.2 STORAGE
In case of long inactivity, the machine must be
stored with cautions concerning storage place
and times.
• Store the machine indoors
• Protect the machine from jarring impacts
and stresses
• Protect the machine from humidity and high
temperatures
• Avoid corrosive materials that could touch
the machine
• Lubricate parts which are not painted
To Next Page
Loading...