AMP Mitre-Mite VN4 MemoryProgram - 8.7 Extraordinary Maintenance

28
TAB. 8.7
Table 8.6
8 . 7 EXTRAORDINARY MAINTENANCE
We have listed below the operations that need the intervention of ITW/AMP’s or your local
distributor’s Technical Assistance (see the paragraph 1.2) or by qualified staff authorized by the
Producer
The extraordinary maintenance includes interventions to be performed in exceptional cases:
• Breakage
• Revisions
Maintenance
V-nail driver blade
Movable parts lubrication
V-nails claw heads
“L” shaped supports (V-nails
guide)
Description
Replacement every 1.000.000 V-
nails shot
Lubricate the driver blade every
200 working hours
Replacement every 5.000.000 V-
nails shot
Replacement every 5.000.000 V-
nails shot
Machine state
Isolation for maintenance
Isolation for maintenance
Isolation for maintenance
Isolation for maintenance
MAINTENANCE
Valves and Reducers
Frontal and vertical
clamping gaskets
DESCRIPTION
Suggested replacement every 6/8
million of V-nails shot
Replacement in case of leak of
air
MACHINE STATE
Isolation for maintenance
Isolation for maintenance