The ear canal volume is above the
5ml. This message can also occur
when the probe is not properly inserted
into the ear.
The ear canal volume is below 0.1ml.
Check that the probe is not blocked
and correctly inserted into the ear.
6. Saving Results in the Internal Database
Up to 30 tests can be saved in the Otowave 102 internal database.
To save the results of a test select SAVE RESULTS from the PROCESS
RESULTS menu that is displayed on completion of a test. This option can
also be accessed by selecting VIEW THE LAST TEST from the main menu
and scrolling through the results using the ► key as long as the test results
have not already been saved or deleted (e.g. by starting and then aborting
a new test).
A three character identifier is used for the record. This is also used as the
reference for the patient’s name on the printed record and for data
transferred to a computer. The identifier would typically be the patient’s
initials, and as the tympanometer uses a combination of this identifier and
the date/time of a test to refer to stored records this same identifier may be
used for different tests for the same patient.
6.1. Data entry
To Next Page
Loading...
Need help?
General
