AmpliVox Otowave 102 User Manual

Page 30 OM001-16 Otowave 102 Operating Manual
REPORT CAL.
DATES
Select PRINT CAL. DATES or
HIDE CAL.DATES
SET DATE
FORMAT
Select DD/MM/YY or MM/DD/YY
(used for display and printouts)
HOSPITAL
NAME
Allows the Hospital name to be
entered (this will appear at the top
of the print out). See Section 6.1 for
the data entry method; then position
the cursor on # symbol and hold ►
to confirm or ◄ to cancel.
DEPARTMENT
Allows the Department name to be
entered (this will appear at the top
of the print out). See Section 6.1 for
the data entry method; then position
the cursor on # symbol and hold ►
to confirm or ◄ to cancel.
RELOAD
DEFAULTS
Select YES to reset the options
above to their default values.
SELECT
LANGUAGE
Select ENGLISH, GERMAN or
FRENCH for operating language
SYSTEM
INFORMATION
Shows: Battery voltage (Battery)
Software version (Version)
Date calibrated (Last Cal)
Next calibration date (Next
Cal)
Instrument serial number
(Serial No)
Current date and time
13. Error Messages & Fault Conditions
If a fault condition cannot be cleared, the operator is
cautioned against repeatedly starting the instrument.
In some fault conditions the internal pump may
progressively advance towards the end of its travel in
an attempt to clear the fault. If the end of travel is
reached in such conditions the instrument may lock up
and become un-usable.
If difficulties resolving fault conditions occur the
equipment distributor (or Amplivox if purchased
directly) should be consulted.

AmpliVox Otowave 102 Specifications

General

Brand	AmpliVox
Model	Otowave 102
Category	Measuring Instruments
Language	English