AMSAFE SEATBELT AIRBAG SYSTEM
INSTALLATION, HANDLING & SHIPPING INSTRUCTIONS E510629
SHIPPING, TRANSPORTATION, HANDLING, STORAGE PROCEDURES
02-Aug-2013
Page 4008
Figure 15: Inflator Label
B. EMA
(1) The EMA shall be stored in cool and dry environments. Acceptable temperature range is -22 to
+131°F (-30° to +55°C). The EMA should be protected from sunlight, dust, moisture, and other
contamination
(2) The EMA shall be protected from excessive EMI/RFI/ESD environments.
(3) Observe all local storage regulations. Store only in a controlled area.
(4) The maximum continuous storage time for the EMA is 14 years calculated from the AmSafe
date of manufacture (Figure 16). At seven years, the EMA should be returned to AmSafe for
refurbishment.
Autoliv Label
AmSafe Label
Note: add 10 years to date of mfr to get expiration date
A = Manufactured in Phoenix
12 = Month
08 = Yea
To Next Page
Loading...