AMSAFE SEATBELT AIRBAG SYSTEM
INSTALLATION, HANDLING & SHIPPING INSTRUCTIONS E510629
SHIPPING, TRANSPORTATION, HANDLING, STORAGE PROCEDURES
04-Aug-2010
Page 4009
Figure 16: EMA Label
NOTE: IF THE INFLATOR HAS BEEN REWORKED OR REFURBISHED THERE WILL BE
AN EXPIRATION DATE ON THE LABEL. EXPIRATION DATE IS LABELED MMYY:
MM = MONTH YY = YEAR. IN THIS CASE THE LABEL WILL ALSO SHOW THE
ORIGINAL DATE OF MANUFACTURE OR ORIGINAL SERIAL NUMBER,
IDENTIFIED AS: ODM: A27SEP11-12 = SEPTEMBER 27, 2011.
C. Inflatable Lap Belt or Restraint Assembly
(1) The Inflatable Lap Belt Assembly shall be stored in cool and dry environments. Acceptable
temperature range is -22 to +131°F (-30° to +55°C). The Inflatable Lap Belt Assembly should
be protected from sunlight, dust, moisture, and other contamination.
AmSafe Label
Note: add 14 years to date of mfr to get expiration date.
A = Manufactured in Phoenix
12 = Month
08 = Year
To Next Page
Loading...