Maintenance/Precautions
-
All glass surfaces must be kept clean. Fine dust on the optical surface should be blown off using a hand blower or
gently wiped off with a soft lens paper tissue/nonab
rasive lint free cloth.
-
Carefully wipe off oil or fingerprints on the lens surfaces using tissue moistened with a small amount of lens
cleaner (we recommend Sparkle brand optical cleaner).
-
Do not use Sparkle to clean other elements of the microscope. Use a neutral detergent on any plastic or painted
surfaces.
-
Do not assemble or disassemble the microscope’s electrical components yourself without advisement from one of
our technicians. Doing so will void your warranty unless by advisement of one of our technicians to do so.
-
After use, cover the microscope with the provided dust cover.
-
Keep your AmScope microscope in a dry, clean location in order to prevent rust or other damages.
To Next Page
Loading...
Need help?
General
