Why is the image unclear with the 100x objective on my AmScope Microscope?
A
Anthony ClaytonAug 8, 2025
To achieve better clarity and resolution with the 100X objective on your AmScope Microscope, use immersion oil. If the image is still unclear, ensure you are using standard cedar wood oil. Also, if immersion oil has accumulated on a dry objective, thoroughly clean the objective lens with lens cleaner or a lint-free, non-abrasive cloth.
A
Amber StricklandAug 15, 2025
Why is the color of the image not accurate on my AmScope Microscope?
C
Carrie RuizAug 15, 2025
If the color of the image is not accurate on your AmScope Microscope, adjust the brightness knob to a higher or lower setting to improve color clarity. Also, consider whether a filter is affecting the color; remove any color filter if natural light is desired, or insert a desired filter.
A
Amanda StarkAug 23, 2025
What to do if obstructions are observed in the field of view of my AmScope T720 Microscope?
C
Christopher BarreraAug 23, 2025
If you observe obstructions in the field of view of your AmScope Microscope, the specimen might be dirty. Clean the slide. If the sample is destroyed, use a new specimen. Also, check the objective, eyepieces, or Barlow lens for stains, dust, or dirt, and clean the lens if necessary.
R
Robert GarciaAug 29, 2025
How to fix one side of the field of view being darker on my AmScope Microscope?
J
justinmartinezAug 30, 2025
If one side of the field of view is darker on your AmScope Microscope, first ensure that the nosepiece is correctly aligned by turning it until it clicks into place. If the issue persists, check all lenses (objectives and eyepieces) for any stains, dust, or dirt, and clean them with lens cleaner or a lint-free, non-abrasive cloth.