T720 Series Microscope
AmScope Proprietary Page 25 of 46
2.18.8 Do not take apart the microscope.
Do not assemble or disassemble the microscopeās electrical
components yourself.
.
2.19 Darkfield Condenser Kit Maintenance
2.19.1 Secure Setting
Ensure that the microscope is located on a smooth, level and firm
surface.
2.19.2 Do Not Take Apart
Do not attempt to disassemble any components.
2.19.3 Keep Kits Clean
Keep the kits clean; remove dirt and debris regularly.
Accumulated dirt on outer surfaces should be cleaned with a
damp cloth. More persistent dirt should be removed using a mild
soap solution. Do not use organic solvents for cleansing.
2.19.4 Keep Lens Clean
The outer surface of the optics should be inspected and cleaned periodically using
an air stream from an air bulb. If dirt remains on the optical surface, use a soft cloth
or cotton swab dampened with a lens cleaning solution (available at the camera
stores).
All optical lenses should be swabbed using a circular motion. A small amount of
absorbent cotton wound on the end of a tapered stick makes a useful tool for
cleaning recessed optical surfaces.
Avoid using an excessive amount of solvents as this may cause problems with
optical coatings or cemented optics or the flowing solvent may pick up grease
making cleaning more difficult.
2.19.5 Cool and Dry Storage
Store the instrument in a cool, dry environment. Put the condenser back in the
storage box when not in use.