EasyManuals Logo
Home>AMX>Switch>DGX800-ENC

AMX DGX800-ENC User Manual

AMX DGX800-ENC
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #238 background imageLoading...
Page #238 background image
Appendix A – Adding or Replacing Boards
238
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
14. Execute a test switch using a connection on the new board to be sure that video is present at the destination
(Control Panel: press Function Key, Select Key, Input Key, Output Key, and Take Key).
 Additional testing for Audio Insert/Extract Board functionality:
Insert function – If the DIP switch for the audio connector is set to insert, the video signal from the corresponding video
input or output will carry the inserted audio; check that the inserted audio is present with the display.
Extract function – If the DIP switch for the audio connector is set to extract, the audio will be extracted from the
corresponding video input or output signal; check the auxiliary or supplemental audio equipment involved to be sure
the extracted audio signal is present where expected.
If the test switch does not work, see “Board Troubleshooting” on the next page.
* If you need cabling information, see the specific board chapter in this manual.
IMPORTANT: If for any reason a board slot is left empty, be sure to attach a blank plate to cover it.
15. Enova DGX 3200 only – Replace connector numbering plate removed in Step 2.
Additional Board Information
If necessary, the System Configuration interface is available for configuring the boards listed below (see page 163).
HDMI and 4K HDMI Boards
For information on HDMI and 4K HDMI Boards, see page 62.
DVI Boards
For information on DVI Boards, see page 74.
DXLink Twisted Pair 4K Boards
For information on DXLink Twisted Pair 4K Boards and system setup with DXLink Twisted Pair 4K TXs and RXs, see page 96.
DXLink Twisted Pair Boards
For information on DXLink Twisted Pair Boards and system setup with DXLink Twisted Pair Transmitters and Receivers, see page 82.
DXLink Fiber Boards
For information on DXLink Fiber Boards and system setup with DXLink Fiber Transmitters and Receivers, see page 109.
Dante Audio Switching Board
For complete information on Dante Audio Switching Boards, see page 128.
Audio Switching Board
For compete information on the Audio Switching Boards, see page 142.
Audio Insert/Extract Board
For compete information on the Audio Insert/Extract Board, see page 154.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AMX DGX800-ENC and is the answer not in the manual?

AMX DGX800-ENC Specifications

General IconGeneral
BrandAMX
ModelDGX800-ENC
CategorySwitch
LanguageEnglish

Related product manuals