Appendix E – Upgrading/Downgrading the System
269
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
Troubleshooting
First:
□ Check all cable connections, check the System Status LED, and execute a test switch.
If the System Status LED is still not illuminated or the test switch does not work:
□ Repeat the installation procedure, checking the internal SD card to be sure it is securely in place and re-seating the CPU board
to make sure that connection is established.
If the System Status LED still does not display normal indications:
□ Contact technical support (see page 61).
To Next Page
Loading...
