Analog way SmartMatriX2 - Page 62

62
8.2.10 Capturing frames

The border has to be seng up in the Layer Menu:

Press TAKE to view the result on the Program screen.
NO BORDER
SHADOW BORDER (4 possible orientaons)
• A transparency can be applied
to the shadow border
• Size and style of layer border are
adjustable
EDGE BORDER
8.2.10 Capturing frames
It is possible to store up to 8 frames in the SmartMatriX² non volale memory. To capture a frame, display the
exact content you want to save on one of your outputs, at the exact resoluon, you can use the freeze buon
if you want. Then follow this step:

Choose the frame number slot and wait unl the unit nishes to save. Your frame is now saved and you can
use it through the frame buon.
The capture of frames can be done only under the following condions:
- The capture can be done from the Program output #1 or the Program output #2,
- The disappearance of frames or logos on the Program output is normal during saving.
A frame captures the state of the specied output at the output resoluon, and must be recalled using the
same output resoluon. Resizing or other image manipulaon of the captured frame is not possible.
Aempng to use a frame at a dierent resoluon will result in a paral frame display or a frame which does