67
8.2.24 Working with Mirror modes
The Mirror Matrix mode is a specic Matrix mode where the output #2 will be the perfect mirror copy of the
output #1. In that way, each sengs apply to output #1 will be performed on the output #2 too.
Using the Matrix mode, several conguraons are available, the simple mode and the mirror mode.
to use the mirror mode, simply select the Matrix mode throught the main menu,
then the mirror mode can be acvated layer by layer thanks to the layers menu. Select the chosen layer and
go in the layer menu, then select the “Layer Copy Mode” menu. There are several mirror posioning opons:
this mode is the standard Matrix mode, output #1 and #2 are independent.
Outputs #1 and #2 will be the same. All changes on output #1 will be aected to output #2.
Layers will have the same posion and size.
OUTPUT #1 OUTPUT #2
OUTPUT #1
OUTPUT #1OUTPUT #2 OUTPUT #2
Output #2 will be exactly the same as output #1 except the fact that the selected
layer will have its H posion ipped (standard Mirror mode).
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
Output #2 will be exactly the same as the output #1 except the fact that the selec-
ted layer will have its H posion and data ipped (only for live layers).
OUTPUT #1
OUTPUT #1
OUTPUT #2OUTPUT #2