15
Medium Distances
Your machine can be moved short and medium distances behind a tractor or truck. Use the
hydraulic jack to raise the front of the bale wrapper. Attach the machine and attach a security
chain to the ring provided for this purpose on the draw bar (Figure 4.3). The front wheels of
the machine should not touch the ground during transportation. Closely align the rear wheels
using the indicator decal and the needle gauge (Figure 4.4). On public roads, follow the traffic
regulations of your region for agricultural machines.
Figure 4.3 Draw bar
Figure 4.4 Indicator decal
Long Distances
When loading the bale wrapper from a dock onto a truck or trailer, attach the bale wrapper
behind a tractor and back it up onto the truck bed or the trailer. Use the hydraulic lever to
facilitate uncoupling from the tractor. To unload the machine, perform these steps in reverse.
Safety Measures
Regardless of how you transport your bale wrapper, once it has been loaded, secure it firmly
and put chocks underneath the wheels. During transportation, do not climb on or let anyone
else climb on the machine. Whenever you move the machine (except by its own traction), it is
essential to close the fuel valve because the gasoline could leak into the engine cylinder and
base and flood it.
To Next Page
Loading...
Need help?
General
