CNC Setup Utility Manual
P/N 70000490C - Machine Constants
2-92 All rights reserved. Subject to change without notice.
10-December-04
Note usage of the ‘P’ modifier, which is used to provide an absolute
position in metric free of any fixture or tool offsets.
Consider, also, using user definable variables (MC_1130 – MC_1139) to
specify values that might need adjustment. For example, with MC_1130
set to –0.6 mm, you could substitute G00 Z&-0.6 with G00 Z&P(#1130).
Future changes to the to tool changer height would only require changing
MC_1130.
To Next Page
Loading...
